4 Ton Hydraulic Bottle Jack

4 Ton Hydraulic Bottle Jack is designed for heavy duty truck and automotive lifting applications.

Hydraulic Bottle Jack

Owner's manual

CHECK OIL LEVEL

1.Turn release valve counterclockwise to allow ram to fully retract. It may be necessary to apply force to the saddle for lowering.

2.With the jack in the level position, remove the oil fill plug. Stand jack in vertical position with handle socket down. The oil should be level with the bottom of fill hole. If not, top off. Do not overfill. Always fill with new, clean hydraulic jack oil.

3.Replace fill plug.

4.Check jack operation.

5.Purge air from system as required.

TROUBLE SHOOTING

1.Turn release valve counterclockwise one full turn to open.

2.Pump handle eight full strokes.

3.Turn release valve clockwise to close valve.

4.Pump handle until the ram reaches maximum heigh and continue to pump several times to remove trapped air in the ram.

5.Carefully and slowly pinch oil fill plug to release trapped air.

6.Turn release valve counterclockwise one full turn and lower ram to the lowest position. Use force if necessary.

7.Turn release valve clockwise to closed position and check for proper pump action. It may be necessary to perform the above more than once to assume air is evacuated totally.

Product Parameters

Product Show

FAQ

Q: Would you have a discount if l have a large order?
A: Yes we could offer different discount according to your order quantity.

Q: Which field are your products applied to?

A: Our products are widely used into the garage,shop, automatic control industry, including: plant maintenance, power generation, mining, infrastructure, and so on.

Q: Do you accept custom design on size?
A: Yes, if the size is reasonable

Hot Tags: 4 ton hydraulic bottle jack, China, manufacturers, suppliers, factory, wholesale, cheap, 3 Ton Welded Inline Bottle Jack, 3 Ton Bottle Jack, 5 Ton Portable Bottle Jack, 2 Ton Hydraulic Bottle Jack, 10 Ton Jack, 30 Ton Bottle Jack