0.5 Ton Transmission Jack

Product Characteristics:

Product instructions

1, with 2 post car hoist or scissor lift to lift the car to a certain height.

2. Push the transmission jack under the car, lift 0.5-ton Hydraulic Transmission Jack to the appropriate position, remove the gearbox and put it in the center of the bracket, then fasten the gearbox with a steel chain, open the unloading valve, and put the bracket and gearbox in the bottom position.

3. Push the transmission jack to the required position, and use the crane to lift the gearbox down for maintenance.

4. After the gearbox is repaired, lift the gearbox with a crane and put it in the center of the bracket, fasten the object with a steel chain, and push the transmission jack to the appropriate position under the car.

5. Close the unloading valve, step on the oil pump, lift the transmission jack to the appropriate position, and install the gearbox. If the gearbox is not in the right position, the transmission jack can be moved or adjusted by the adjusting handwheel under the bracket.

Product Features:

1, simple operation, easy to use.

2, the plunger is labor-saving and high efficiency.

3, Chrome plated piston rod.

4, Polyurethane wheels with lock

5, Adjustable saddle

6, Adjustable saddle with strap.

product application：

0.5 Ton Hydraulic Transmission Jack is mainly used for the high installation and disassembly of the vehicle gearbox, the transmission motor, the front, and rear axle, and other objects whose weight is not more than 500kg.

Product parameters:

Hot Tags: 0.5 ton transmission jack, China, manufacturers, suppliers, factory, wholesale, cheap, 1 5 Ton Floor Jack, 0.5 Ton Floor Jack, 1 Ton Transmission Jack, Telescopic air floor jack, 0.5 Ton Hydraulic Jack, 80 Ton Air Hydraulic Floor Jack