1. After the air in the tire is drained, remove all lead blocks on the steel ring.
2. Completely separate the tire from the steel ring by using the stripper bayonet.
3. Place the steel ring on the chuck, lock the steel ring, and apply lubricant on the tire ring.
4. Pull down the disassembly and assembly arm. The inner roller of the chuck is stuck to the edge of the steel ring. Use the clamping rod to pull the tire stripping arm
Clamp.
5. Pick the tire to the bird's head with a crowbar, press the pedal to rotate the chuck, and pull out the tire on one side,
Pull out the other side in the same way.
6. Apply lubricating oil on the inner edge of the new tire, fix the steel ring on the chuck and place it on the tire
7. Move the disassembly and assembly arm to press the tire edge, press the pedal to press the tire into the rigid ring, and
The upper tire is pressed into the rigid ring.
8. Tire inflation - the standard air pressure must be used to avoid casualties.
